Painted plywood gingerbread house panels, coiled light strings on hooks and labelled bins inside an open 20ft container behind a community hall, with an empty float trailer parked beside it in early December

Quick Answer: Christmas parade float ideas match the parade’s 2026 theme, read well at night and pack away afterward. Try Santa’s workshop elves, a gingerbread house, a winter rink, a nativity or a toy train. Build props in door-sized pieces, then store them in a 20ft or 40ft high cube between parades.

Reading Time: 16 minutes

What Is a Parade Float?

A parade float is a decorated platform that carries a themed scene and its riders along a parade route. Usually it is a trailer or a flatbed truck. On an Ontario street in late November, that means a lit trailer behind a pickup, a skirt over the wheels and volunteers in costume.

This guide is for the people who build them: service clubs, schools, churches, minor hockey teams, scout troops and local businesses. Below are float ideas by theme and effort, the rules Ontario organizers published for 2026, and a working method for trailer, lights and power. For where and when to watch, our roundup of this season’s Santa Claus parades across the province covers the dates.

The last third deals with the question every crew faces on the first Monday of December: where does all of this go now? Van Blanc Ent. Inc. sells shipping containers from 4 Brantford yards, and Paul LeBlanc started Van Blanc in 1995. For a club that builds every year, one steel box on its own lot can hold the float between parades.

Christmas Parade Float Ideas by Theme

The table sorts the Christmas parade float ideas that show up again and again in Ontario parades by how much work they take. Effort assumes a crew of six to ten volunteers and a standard flatbed. The storage column is what you will pack away in December, often into a single 20 foot box behind the hall.

ThemeWhat goes on the deckEffortWhat you store afterward
Santa’s workshop (elves only)Workbenches, toy shelves, a painted brick wall, elves at workMediumFlat wall panels, benches, bins of toys
Gingerbread houseA plywood house front, giant candy trim, a gumdrop pathMediumHouse front in two or three sections
Winter wonderlandWhite batting, flocked trees, icicle lights, a sleigh propLowArtificial trees, light reels, the sleigh
Backyard rinkWhite deck, mini boards, kids in hockey gear, a snowman refLowRink boards, nets, the snowman
Nativity sceneA stable backdrop, straw, costumed figures, soft warm lightLowThe stable frame and costumes

The next five take more building hours and more floor space in December. Get the storage box on site before the build starts; how a container delivery is booked and staged covers the timing.

ThemeWhat goes on the deckEffortWhat you store afterward
Toy trainA cut-out engine on the cab, cars built over the trailerHighEngine and car shells, the tallest pieces
Snow globeA clear dome or hoop frame over a small sceneHighThe dome frame, which does not fold
Twelve days of ChristmasTwelve signs or small scenes along the skirt lineMediumTwelve sign boards
Nutcracker toy soldiersTall soldier cut-outs, a drum line of marchers behindMediumSoldier cut-outs taller than a person
Sugar shack ChristmasA cabin front, a wood pile, plaid and toquesMediumCabin panels and a crate of props

Two of these lean Canadian on purpose. The backyard rink and the sugar shack read instantly to a curbside crowd in Ontario, and both use cheap white and plaid materials. A rink also gives a minor hockey association a reason to put its whole house league on the float. The boards and nets then winter in a used wind and watertight box behind the arena.

“For a minor hockey association’s rink boards and nets, I’d point to a used wind and watertight box. Its dents and rust spots are on the outside, and the boards stay dry behind the arena.”

Paul LeBlanc, owner, Van Blanc

Simple float ideas for schools

A school float has to hold a lot of children safely and be built in a few evenings. The simplest wins make the children the decoration. Think of a class of snowflakes, a choir in matching toques, or a gingerbread family in paper aprons. Keep props low and let costumes carry the colour. A school that keeps its parade gear from year to year faces a storage question too. Van Blanc’s note on the way school boards buy steel containers covers the paperwork.

Float ideas for churches, clubs and businesses

Churches tend toward the nativity, a carol choir or a star over Bethlehem, lit softly. Service clubs often pick a scene tied to what they do. A Lions club can put a den of lions in scarves and toques on the deck. A club sharing one box between a parade, a fair and a fundraiser can read how charities and service clubs share a single container first.

A business float can be the best on the street if it skips the sales pitch. Windsor’s 2026 rules suggest keeping advertising to a minimum, giving a small magnetic sign as the example, or using none at all. A plumbing company can build a frozen-pipe ice palace. A bakery can run a gingerbread factory. The name rides on the banner, and the float does the rest. A shop with a slow season can build the float in a container set up as a small workshop, then keep it there.

2026 Parade Themes Ontario Organizers Set

Many parades set a theme, and judges score against it. Check the entry package before you sketch. These 2026 themes appear on organizer forms read on November 3, 2026.

  • Brampton Santa Claus Parade: ‘Twas the Lights Before Christmas. Brampton’s rules also require every entry to be decorated with lighted materials.
  • Windsor Santa Claus Parade: A Super Hero Christmas. Entries are due by November 16, 2026, for the parade on December 5, 2026.
  • Town of Parry Sound Santa Claus Parade: Santa’s Workshop, on November 28, 2026.

If your parade has not published a theme, the safe trend is light. Brampton’s theme and its lighted-materials rule both put lighting first, and a float that glows reads better on phones and on the broadcast. In Brantford, the City lists the Santa Claus Parade for Saturday, November 28, 2026, at 6:00 p.m. Brantford crews build for the dark too. Many towns hold a market the same weekend, and vendor stalls at Ontario Christmas markets covers that side of the season.

Parade Float Rules, Word for Word

Every parade publishes its own rules, and they differ. Read yours in full. The tables below quote the 2026 documents we read word for word, so you can see what organizers actually ask for. Where a rule is a recommendation, it is marked that way. Committees that run a parade also store barricades, banners and marshal vests, the load covered in storage for volunteer-run community groups.

RuleHow the organizer words itParade
SantaNo entries are allowed to have a Santa Claus as part of their entryBrampton
SantaNo entry may depict Santa Claus and/or Mrs. Claus or Santa’s floatWindsor
HeightThe height restriction is 12‘0” and is to be calculated from the road surface to the highest point of the floatBrampton
SizeMaximum size 30 metresWindsor
SpacingThe minimum (50’) and maximum (100’) distance between them and the entry in front of themBrampton
ThrowingNo material (including candy) may be thrown from any entryWindsor

The rest of the rules cover the build and the people on it. Several add kit you keep all year, from the extinguisher to the skirt battens, and gear that sits idle between seasons needs a dry home.

RuleHow the organizer words itParade
HandoutsPlease ensure all handouts are given directly to the spectators so as not to be thrown into the roadParry Sound
FireThere shall be NO OPEN FLAMES. All floats shall have a minimum of one Fire Extinguisher (ABC – 10-lb. capacity minimum)Brampton
SkirtsFloats shall have decorating skirts covering the sides of all vehicles to the axle heightBrampton
RidersRailings or handlebars must be provided for all riders who are standing. All children must be seated and be secured in their seatsBrampton
ChildrenChildren on Floats must be supervised by at least one adultParry Sound
TransitIt is recommended by Police Services that no riders be on their float or entry in transit to the registration-staging areaWindsor

For the extinguisher Brampton asks for, Ontario’s Office of the Fire Marshal adds one upkeep habit worth carrying into the off season.

“Inspect the extinguisher once a month and check the pressure.”

Office of the Fire Marshal, Ontario Fire Safety Guidebook

The Santa rule surprises first-time builders more than any other. Build around other icons: elves, reindeer, a snowman, or a scene borrowed from the gear a working Christmas tree farm stores for November. Brampton, Windsor and Parry Sound all keep Santa out of the entries. Brampton saves him for the Santa Claus float at the end of the parade. Design your elves, reindeer and workshop without the man himself.

Brampton also inspects every float for safety and decoration before it enters the marshalling area, and an entry that fails does not march. Windsor tells entrants that design and safe operation are their own responsibility. Read that as a building standard, then build to it. Peel crews building for that inspection can see stock through container sales for Brampton and Peel.

Float Trailer and Tow Vehicle

Most community floats ride on a flatbed or utility trailer behind a pickup. A trailer with side rails can be decked over, which we cover in the build steps. Brampton’s rules point out that a standard flatbed’s bed sits too high for children along the curb to see, and suggest a low-riding trailer instead.

Measure the whole entry, bumper to bumper. Brampton asks for length from the front bumper of the pulling vehicle to the rear bumper of the float. It warns that wrong measurements, which tend to run short, cause trouble in a crowded marshalling area. It also asks you to flag any entry wider than a standard tractor-trailer. Keep that tape measure handy, because the same habit later matches props to the inside measurements of each container size.

The tow vehicle is part of the entry. Brampton requires a licensed driver, safety chains and a safety hitch chain, and a vehicle in good mechanical condition. It also asks for a full tank on parade day, citing past unhappy experiences.

Decorating the truck that pulls the float

Brampton requires the cab of a pulling truck or tractor to be at least 80% decorated. The driver must still have clear vision ahead and to the sides, and exhaust pipes must extend beyond the decorations. Parry Sound tells drivers to keep the window open and the horn silent, air horns included.

The usual approach is a fabric or vinyl wrap on the hood and doors. Garland goes along the box rails, and light strings go on the grille guard and roof rack. Leave the windshield, mirrors, headlights and plate clear. A plywood cut-out bolted to the bed can turn the cab into a train engine or a sleigh front without touching the glass. Cut-outs are easier on a solid bench, and bolting a bench and vise inside a steel box shows one set-up.

Parades such as Windsor’s do not accept a plain car as an entry, so a decorated car usually carries invited guests. For those cars, the gentlest attachments are soft ties to a roof rack, magnet-backed hooks on steel panels and removable vinyl clings. Run wiring for battery lights inside the car, not across the windshield. Test everything at low speed in a parking lot before the day. Float crews in that city can check containers for sale in Windsor and Essex County.

Building a Parade Float in Ten Steps

Experienced crews tend to work in this order. Start three to four weekends out, and longer if your theme has tall pieces.

Float build, start to finish

  1. Read the entry package: theme, size limits, deadlines and the Santa rule.
  2. Sketch the float on paper, side and back view, with heights marked against the parade’s limit.
  3. Measure the trailer deck and the tow vehicle, then add them together bumper to bumper.
  4. Deck over any rails with pallets and plywood screwed down, so props have a flat floor.
  5. Frame the skirt to axle height, with clearance from the wheels for bumps and potholes.
  6. Build props as bolted panels and sections, sized to the door of the box they will winter in.
  7. Fit railings for standing riders and fixed seats for children.
  8. Run the lights, add up the wattage and size the generator or battery.
  9. Mount the fire extinguisher where the driver and crew can reach it.
  10. Do a night test run in a lot, then fix whatever came loose.

Step six is the one that decides your December. A float built as sections comes apart in an hour and stacks flat. A float built as one glued, stapled sculpture either goes to the dump or takes over somebody’s garage. We come back to that below, because it shapes which container suits your crew. To keep the cold out of the crew while they build, see the man doors, shelving and insulation we fit at our yards.

Lighting and Generator Load

Night parades are lit parades. Brampton requires lighted materials on every entry, and an unlit float disappears on a night route. LED strings draw far less than older bulbs, which shrinks the generator you need. Tree sellers plan the same evening light, as a Christmas tree lot’s lighting and layout plan shows.

“Read manufacturers’ instructions for connecting. Usually no more than three light strings can be safely connected.”

Electrical Safety Authority, Safe Holiday Decorating Tips

Brampton’s entry package walks through the arithmetic. A string of 25 bulbs at 5 watts each draws 125 watts. Ten of those strings draw 1,250 watts, or 1.25 kilowatts, and that is the minimum generator size before you add the sound system. Read the wattage off every light set and speaker, add it up, then size up. Permanent wiring in a storage box is different work, described in a container electrical panel install.

The Electrical Safety Authority (ESA) publishes Ontario’s generator safety guidance. It says: “Never operate a generator inside your home or garage, as it will cause a build-up of fatal fumes”. It also says to “allow the generator engine to cool at least 2 minutes before refueling”. Extension cords should be “the grounded type with three prongs and rated for your use”. Brampton adds that generator exhaust pipes must extend beyond the decorations and that powered equipment must be CSA or UL approved.

Generator size and event notification

ESA’s special events page says: “Generators larger than 12 kilowatts or 240 volts must have an electrical notification”. Brampton’s 1.25 kW lighting example sits well below that, but a committee lighting a whole staging area could cross it. ESA also says to place tents at least 4.8 metres (horizontally) away from powerlines, never directly under them. That is worth knowing when you stack props outside a storage box. The box itself can take vents and a welded lockbox added at our yards, which keep it drier and harder to break into.

Apply the same ESA advice when the float is parked. A generator never runs inside a closed steel box, and the gas can stays outside it too. Light reels and extension cords keep better on a dry shelf than on a garage floor. For wiring in the box itself, read what a licensed electrician handles when a container gets power.

Riders, Marchers and Candy

Route-day rules are where floats get pulled. Brampton allows no stopping or reversing once the parade is underway, except when a marshal asks. Marchers walk behind the entry, never in front of it, and the number of marchers is limited to 15. Tall props need bracing for the stop-start pace, much like blocking and bracing a load with lumber. Brampton also has each entry supply two banner carriers in costume.

Candy is the rule most often broken. Windsor says any entry caught throwing candy will be required to exit the parade immediately, without a refund. Brampton bars throwing or distributing anything along the route. Parry Sound asks that handouts go directly to spectators. Your parade’s rule is the one that counts, so check it.

Plan the children’s seats around the safety rules, not the scene. Brampton says children must be seated and secured, with no exceptions, and that everyone aboard must be able to get off immediately in an emergency. Windsor’s entry form says entries must be entertaining to a family audience primarily made up of children between the ages of two and eleven.

Music is preferred at Brampton but no longer mandatory. If you bring it, it must be Christmas music. Speakers face out to the sides, so you do not drown out the floats ahead and behind. After the route, the speaker stacks need a dry home too, and a high cube tall enough for speaker cases on end takes them upright.

Props That Come Apart

One design rule saves a float for next year: every prop has to fit through a door. A standard container door opening is 7 ft 8 in wide and 7 ft 6 in high. A high cube door is the same width and 8 ft 6 in high. Draw those two rectangles on your sketch and design every large piece to break down inside them. If a piece will not break down, ask the yard which door it clears before you build it.

“When a float crew brings a sketch to our yards, I look for the piece that won’t clear a container door, like a tall reindeer or a full arch. Hinge it or split it before the first coat of paint goes on.”

Christian LeBlanc, second-generation operator, Van Blanc
  • House fronts and walls: build in panels no wider than a sheet of plywood, bolted together on the deck.
  • Arches and train cars: split at the crown or the coupling, with bolted plates instead of glue.
  • Tall cut-outs such as soldiers or trees: hinge them at the knee or the trunk so they fold flat.
  • Domes and globes: use hoop frames that nest, not a fixed sphere.
  • Skirting and fringe: hang it from a removable batten so it rolls up in one piece.

Van Blanc’s container doors are the measuring stick here, and the rule holds whether the props go into a box or a barn. Seal every painted panel before the parade, since wet roads are hard on paint. The idea mirrors prepping steel so outdoor paint holds.

The trailer itself rides home empty and parks wherever the club keeps it. The props, lights, costumes, skirt and sound gear are what need a dry, locked home. Never plan to put a container on the float trailer; the box stays on the ground, and the float rolls past it.

Where a Float Spends January

Ask a parade committee where last year’s float is. The answer is often a member’s barn, a church basement, a borrowed dealership bay or the dump. Borrowed space moves. The member sells the farm, the dealership needs the bay, and the float goes back to scrap. Seasonal businesses face the same problem, as storage for businesses that close for part of the year shows.

A container on the club’s own lot ends that cycle. A Van Blanc box sits on a level gravel pad behind the hall or the school and locks with one key. It holds the float in pieces from early December to the next build. Clubs that use the same box for a summer fair or a fundraiser get two seasons out of it. Our piece on keeping gear that only works one season a year sets out how to rotate it.

“I’ve spent 19 years in containers, and a box that kept cargo dry across an ocean will keep a parade float’s gingerbread panels and elf costumes dry behind a church hall for a lot of Decembers.”
Paul LeBlanc, owner, Van Blanc

The box also becomes the build room. Fit a hinged steel man door beside the cargo doors, lights and a workbench at one end. Then a crew can paint panels in October without borrowing a garage.

20ft Box for Float Props

For most community floats, a 20 foot container from Van Blanc is the working size. Inside, it runs 19 ft 4 in long, 7 ft 8 in wide and 7 ft 10 in high, with 1,172 cu ft of space. On the floor it takes 10 pallets, which is a useful way to picture a broken-down float on pallets and in bins. The full measurements sit on the 20 foot container’s spec page.

A typical 20ft float load looks like this, packed from the back wall forward.

  • Wall panels and house fronts standing on edge along one side.
  • Rolled skirting, fringe and batting in labelled totes on shelves.
  • Light reels on hooks, so strings do not tangle or crush.
  • Costumes in sealed bins off the floor.
  • The sound system and extension cords on an upper shelf near the doors.
  • Benches, the sleigh and small props in the last few feet.

Rows of pallets with an aisle keep the back wall reachable. See loading pallets so the far end stays within reach for the patterns. A crew in the Grand River area can see 20s on the ground through containers sold to Kitchener and Waterloo buyers.

40ft High Cube for Tall Pieces

Choose the bigger box when the float has tall pieces or when two groups share it. Some clubs weigh one 40 against a pair of 20s for that reason. A 40 foot high cube is 39 ft 6 in long and 8 ft 10 in high inside. It holds 2,689 cu ft (76.1 m³). Its door opening is 8 ft 6 in high, a foot more than a standard box. That extra foot is what lets a soldier cut-out or a folded tree go in standing.

Measure20ft standard40ft high cube
Inside length19 ft 4 in39 ft 6 in
Inside height7 ft 10 in8 ft 10 in
Door opening height7 ft 6 in8 ft 6 in
Inside volume1,172 cu ft2,689 cu ft
Floor pallets10 pallets20 pallets
Best forOne float in pieces, lights, costumesTall props, two floats, or float plus a fair

A 40HC also leaves room for a work zone near the doors. Some clubs fit the doors end with a bench and keep the float stored behind it. The 40ft high cube details, grades and stock are on our 40 foot high cube page with the inside measurements. Simcoe County crews can check what is ready through Barrie-area container sales.

Packing Up After the Last Parade

A float comes off the route wet, salty and cold. Pack it that way and the fabric mildews by spring. Give it one dry evening in a heated space first, or open the bins in the container on a dry day before you seal them.

  1. Pull the light strings first, test each one, and coil it on a reel with a tag for length and colour.
  2. Unbolt panels and wipe road salt off painted faces.
  3. Dry costumes and batting fully before they go in bins.
  4. Drain the generator to the manufacturer’s storage instructions and keep the fuel can out of the box.
  5. Photograph the float in pieces, with labels, so next year’s crew can rebuild it.
  6. Pack the heaviest pieces low and against the walls, the fragile ones high.

“Check last year’s decorations for signs of wear and tear.”

Electrical Safety Authority, Holiday Shopping Checklist

Steel boxes can drip inside when the temperature swings, so airflow matters for fabric. Container vents that help damp fabric dry out explains the options. A lockbox protects the padlock from bolt cutters, and a lockbox compared with a plain padlock weighs the two.

Float Workshop Inside a Container

A Van Blanc container that stores the float eleven months can host the build in the twelfth. The changes are modest. A steel man door lets the crew in without swinging the cargo doors in a November wind. Lights and outlets let them paint after work. Insulation keeps the glue and the volunteers warmer. The door and insulation go in at our yards before delivery. Interior electrical work is roughed to spec, and a licensed Ontario electrician makes the final connection at your site.

Run the generator outside, as ESA says, and feed the box through a proper cord. Some crews add a roll-up door so carts roll straight in. Van Blanc compares a roll-up door set against the standard cargo doors.

Float crews who walk the yards first

A committee can drive to Brantford and stand inside a 20ft and a 40ft high cube with a tape measure and the float sketch. Half an hour there settles the size question. Before the trip, a committee can read the 140+ Google reviews behind Van Blanc’s 4.9 stars, earned by a company running since 1995. To view our bins in person before you buy, visit our Brantford yard at 90 Morton Avenue East.

New or Used Steel for a Club

Van Blanc sells four grades, and a float crew can pick any of them. New, or one-trip, boxes have made a single loaded voyage and carry factory paint, though minor handling marks are possible. Factory paint matters if the box sits beside a church or a school entrance. Van Blanc keeps them on the new container page with its one-trip stock. Cargo worthy units are used, inspected and still certified for shipping. Wind and watertight units are older, show more rust and dents, and stay dry and secure on the ground. As-Is units are donor and scrap stock with known faults.

For a used box, used containers sold with the grade written on the quote explains what each grade looks like in person. To compare sizes and grades side by side, browse every container size and grade we sell. Van Blanc posts prices on our container price list. Your number moves with size, grade, distance from Brantford and any doors or lights.

Every unit on the Van Blanc price list is in stock and ready for your order, in standard and high cube. Pay on delivery is how Van Blanc works: the box arrives, you check it, then you pay. Draft cheque, cash, wire transfer and credit card by authorization form are all accepted.

Delivery to Club Lots and Church Yards

Van Blanc trucks reach any Ontario address in 1 to 3 days, loaded at our 4 Brantford yards. Every quote comes with a real lead time, not a hopeful one. A Van Blanc tilt-deck truck slides the box onto the ground. For when a crane makes sense instead, see tilt-deck and crane delivery side by side.

Pick the spot before the truck arrives. The ground should be firm, level and drained, with room for the truck to back in straight and the doors to swing fully. If the box lands in December, read how delivery works on frozen winter ground first. Point the doors toward where the trailer parks, so loading day is a short carry. Niagara crews building for the Falls and the towns along the Welland Canal can order through containers sold across Niagara Falls. Permits are managed by your municipality, so check with your local building or planning department before you order.

“A church yard can be tight, with the hall steps and parked cars in the way. I ask the club to walk the straight line our tilt deck will back down, because the float box lands right where that line ends.”

Christian LeBlanc, second-generation operator, Van Blanc

One warning before you shop. A club treasurer is an easy target for a Facebook seller with a cheap container and a request for a deposit by e-transfer. Many people call us saying they found a bin far cheaper online, and some call back two weeks later after losing the deposit. How the Marketplace container deposit scam works walks through the signs.

When you are ready, call the yard with your float sketch and postal code. You can also send the crew’s size and location through the quote page.

Frequently Asked Questions

How do I build a float for a parade?

Read the entry rules, sketch the float with heights marked, and measure the trailer and tow vehicle bumper to bumper. Deck over the trailer with pallets and plywood, frame a skirt to axle height, and build props as bolted sections. Add railings, seats, lights, a fire extinguisher, then test it at night.

What does float mean in a parade?

A float is a decorated platform, usually a trailer or flatbed truck, that carries a themed scene and riders along a parade route. Most community floats are a lit trailer behind a pickup, with a skirt hiding the wheels.

How do you decorate a truck for a Christmas parade?

Wrap the hood and doors in fabric or vinyl. Run garland and light strings along the rails, grille guard and roof rack, and add a plywood cut-out in the bed. Keep the windshield, mirrors, lights and plate clear. Brampton requires a pulling truck’s cab to be at least 80% decorated, with clear driver vision.

How do you attach decorations to a car for a parade?

Use soft ties on a roof rack, magnet-backed hooks on steel panels and removable vinyl clings, and keep battery light wiring inside the car. Leave the windshield, mirrors and lights clear. Test everything in a parking lot first. Many parades accept cars only for invited guests, so check the entry rules before you decorate.

What size trailer do I need for a parade float?

Most community floats use a flatbed or utility trailer long enough for the scene. Brampton notes a low-riding deck is easier for children along the curb to see. Check your parade’s limits: Brampton caps height at 12 feet from the road, and Windsor’s maximum entry size is 30 metres. Measure the whole entry, tow vehicle included.

Where do you store a parade float after Christmas?

Take the float apart into panels and bins, dry everything, and store it somewhere dry and locked. Many clubs buy a 20ft container for one float, or a 40ft high cube when props are tall or two groups share the space. Keep the generator’s fuel can outside the box.

Can I have Santa on my parade float?

Usually not. Brampton says there shall be only one Santa Claus, on the final float, and Windsor says no entry may depict Santa Claus or Mrs. Claus. Parry Sound asks participants not to come dressed as Santa Claus. Elves, reindeer and a workshop without Santa are the common way around it.

Sources

  1. Brampton Santa Claus Parade Committee. (2026). 2026 Brampton Santa Claus Parade Entry Regulations, checked November 2026.
  2. Windsor Parade Corporation. (2026). 2026 Windsor Santa Claus Parade Float Application and Rules, checked November 2026.
  3. Town of Parry Sound. (2026). Town of Parry Sound Santa Claus Parade Application 2026, checked November 2026.
  4. City of Brantford. (2026). City of Brantford, Parade After Party and Santa Claus Parade, checked November 2026.
  5. Electrical Safety Authority. ESA, Generator Safety, checked November 2026.
  6. Electrical Safety Authority. ESA, Special Events and Celebrations, checked November 2026.
  7. Office of the Fire Marshal. (2026). Fire Safety Guidebook, Fire Extinguishers, checked November 2026.
  8. Electrical Safety Authority. (2025). ESA, Safe Holiday Decorating Tips and Holiday Shopping Checklist, checked November 2026.

Float Storage Quotes From Brantford

We have been supplying shipping containers across Ontario since 1995, from four yards in Brantford, and the box is paid for on the day it lands.

Van Blanc Ent. Inc., 90 Morton Ave E Unit 1B, Brantford, ON N3R 7J7, 519-754-6844.

Bring the float sketch, or describe the tallest piece over the phone. We will tell you on the spot whether a 20ft or a 40ft high cube holds it, and which units are on the ground this week. Worth the drive for unbeatable quality, family customer service with 30 years of experience.

Related Reading

Call Get a Quote