Container Accessories, Stocked and Quoted From Our Brantford Yard.
The hardware that makes a container work harder: twistlocks for stacking, lock boxes for security, ramps for loading, vents for condensation control. Add what you need to your quote list below and we will price everything together, with your container or on its own.
Corner Casting
Standard 178 × 162 × 118 mm · ABS certificateThe cast-steel corner block every container is lifted, stacked, and secured by. Used for repairs, foundations, and custom fabrication where you need a certified anchor point.
Bridge Fitting
260 mmTies two containers together side by side or end to end so they behave as one structure. Standard hardware for multi-container buildings and permanent placements.
Container Booster Lifter
195 × 125 × 165 mmLocks into the corner casting to give lifting equipment a proper engagement point. Takes the guesswork out of moving a container around your site.
Manual Twistlocks
Stacking and securing hardwareThe standard connector for stacking one container on another. Drops into the corner castings and locks with a quarter turn. Sold per piece, four per stacked joint.
D-Ring, Removable
Removable lashing pointA tie-down point you can position where the load actually needs it, then take out when it is in the way. Popular for containers that haul equipment and mixed cargo.
3-Tier Container Shelving Brackets
Three shelf levels per uprightHooks into the container wall without drilling or welding. Add your own lumber for shelves and turn dead wall space into three levels of organized storage.
Large Door Handle
With retainer catch plate and handle hub rivet bushComplete replacement handle assembly for cargo doors that have seized, bent, or rusted hardware. Restores full leverage on stubborn door gear.
Large Metal Air Vent
330 × 330 mmMoves real air volume compared to factory vents. The first line of defence against condensation, and we can install it before delivery. Field guide: ventilation options.
Corner Lock
Corner casting connectorJoins containers at the corner castings for placements where they need to stay put together. Simpler than a twistlock, solid for ground-level connections.
Container Ramp
1542 L × 2000 W × 145 mm · 6.5 t load capacityBridges the sill so pallet jacks, carts, and equipment roll straight in. Rated for 6.5 tonnes, wide enough for a full pallet with room to steer.
Retainer Sets
Retainer catch, retainer plate, bushThe small parts that keep a cargo door handle seated and secure. Cheap insurance when you are rebuilding door hardware on an older container.
Bolts and Nuts
M10 × 35The correct fastener for mounting container door hardware, vents, and accessories. Matched to the hardware on this page so everything goes together the first time.
Lock Box
Steel padlock shroudShields your padlock from bolt cutters and pry bars. The single most effective security upgrade for a stored container. We weld them on at the yard before delivery. Field guide: welded lockboxes.
Build Your List, We Price It All-In.
Add accessories to your quote list and send it through the form, or call and tell us what the container needs to do. We will confirm stock, quote everything together, and if hardware needs welding or installation we handle that at the Brantford yard before your container ships. Need a modification instead of a bolt-on part? See our custom container modifications.